Sampling
Click here to watch our Automated Sampling video
|
Sampler Type |
Model Range |
Principle of Operation |
Drive Mechanism |
Sampling Stage |
Feed Rate* |
Maximum Conveyor Width** |
Pipe Diameter |
Suitable for Slurry? |
|
|
Synchronous Belt Drive |
SBD 3700 |
Linear Cross Stream |
2 x Toothed Belts |
Primary |
7,000 to 16,000 TPH |
2.0m |
n/a |
No |
|
|
Belt Drive Linear |
BDLS 80 |
Linear Cross Stream |
1 x Toothed Belt |
Primary |
7,000 to 16,000 TPH |
1.2m to 2.5m |
n/a |
No |
|
|
Belt Drive Linear |
BDLS 63 |
Linear Cross Stream |
1 x Toothed Belt |
Primary |
4,000 to 7,000 TPH |
1.2m to 2.5m |
n/a |
No |
|
|
Ball Screw Linear |
BSLS 50 |
Linear Cross Stream |
Ball Screw |
Primary |
<5,000 TPH |
1.2m to 1.8m |
n/a |
Yes |
|
|
Ball Screw Linear |
BSLS 40 |
Linear Cross Stream |
Ball Screw |
Primary and Secondary |
<3,000 TPH |
1.0m to 1.8m |
n/a |
Yes |
|
|
Ball Screw Linear |
BSLS 25 |
Linear Cross Stream |
Ball Screw |
Primary, Secondary and Tertiary |
<500 TPH |
0.3m to 1.0m |
n/a |
Yes |
|
|
Belt Drive Linear |
BDLS 25 |
Linear Cross Stream |
1 x Toothed Belt |
Primary, Secondary and Tertiary |
<500 TPH |
1.8m |
n/a |
Yes |
|
|
Arcual |
AS Range |
Arcual Cross Stream |
Direct |
Primary and Secondary |
<110 to 1,000 TPH |
n/a |
150NB to 450NB |
Yes |
|
|
Vezin |
VS Range |
Rotary Cross Stream |
Direct |
Primary, Secondary, Tertiary and Quarternary |
<8 to 110 TPH |
n/a |
40NB to 150NB |
Yes |
|
|
Rotary Tube |
RTS Range |
Rotary Cross Stream |
Direct |
Primary, Secondary and Tertiary |
<5 to 10 TPH |
n/a |
Vibratory Feeder |
Yes |
* Please note that feed rates quoted are general indications only. For the arcual and vezin samplers calculations are based on 60% pipe capacity, 2.5m/sec material velocity and a material pulp density of 1.2. When selecting the correct sampler for an application it is important to model individual customer data to accurately understand the system requirements and installed equipment performance.
** Maximum conveyor width guidelines are based on sampler stroke length. The number of cutter spoons and the cutter spoon aperture size will effect available stroke length in relation to belt width.
The information contained in this page is provided for promotional purposes. Essa does not warrant its accuracy or completeness. While Essa attempts to ensure that the information is accurate, Essa reserves the right to change features or specifications at any time.
Performance characteristics will vary depending on the application.
Please check with Essa at the time of ordering whether the equipment is suitable for your intended application.